[设为首页] [加入收藏[繁体中文]
SMT易网技术频道

  当前位置:首页 >> 技术文章 >> 行业标准 >> 正文

基础知识 SMT工艺 技术交流 无铅专题 焊接技术 PCB工艺 行业标准 品质管理 电子技术 封装技术

IEC 2008年8月下旬颁布的新标准目录

【来源:CESI】【编辑:童晓明翻译】【时间: 2008-9-12 8:38:32】【点击:

序号

标准代号

发布

时间

国际标准        分类号(ICS

英文名称

中文名称

版本

 

委员会

TC/SC

1

ISO/IEC 18000-4

29 /8/ 2008

35.040

Information technology -- Radio frequency identification for item management -- Part 4: Parameters for air interface communications at 2,45 GHz

信息技术---项目管理的无线电鉴定---4部分:在2,45 GHz下的空中界面通信参数

2.0

 

2

ISO/IEC 18000-3

29 /8/ 2008

35.040

Information technology -- Radio frequency identification for item management -- Part 3: Parameters for air interface communications at 13,56 MHz

信息技术---项目管理的无线电鉴定---3部分:在13.56 GHz下的空中界面通信参数

2.0

 

 

IEC 62369-1

28 /8/ 2008

33.050.

Evaluation of human exposure to electromagnetic fields from short range devices (SRDs) in various applications over the frequency range 0 GHz to 300 GHz - Part 1: Fields produced by devices used for electronic article surveillance, radio frequency identification and similar systems

人体暴露于来自短距离设备频率为0 GHz ~ 300 GHz多种应用电磁场的评估---1部分:由电子商品监视、无线电频率鉴定和类似系统用设备产生的电磁场

1.0

TC 106

 

IEC 60238

28 /8/ 2008

29.140.10

Edison screw lampholders

爱迪生螺旋灯座

8.1

SC 34B

 

IEC 60512-25-9

28 /8/ 2008

31.220.10

Connectors for electronic equipment - Tests and measurements - Part 25-9: Signal integrity tests - Test 25i: Alien crosstalk

电子设备连接器---试验和测量---25-9部分:信号完整性试验---试验25i---不同色度亮度干扰

1.0

SC 48B

 

IEC 60050-121-am2

28 /8/ 2008

01.040.17 29.020. ; 17.220.01

Amendment 2 - International Electrotechnical Vocabulary - Part 121: Electromagnetism

修改2---国际电工词汇---121部分:电磁学

2.0

SC 48B

 

IEC 62396-3

28 /8/ 2008

03.100.50;31.020. ; 49.060.

Process management for avionics - Atmospheric radiation effects - Part 3: Optimising system design to accommodate the single event effects (SEE) of atmospheric radiation

航空电工学---大气辐射效应---3部分:优化系统设计调节大气辐射的单个事件影响(SEE)

1.0

TC 107

 

IEC 61400-25-4

27.180.

28 August 2008

Wind turbines - Part 25-4: Communications for monitoring and control of wind power plants - Mapping to communication profile

风力涡轮---25-4部分:风电站的监督和控制通信---对通信剖面的影射

1.0

TC 88

 

IEC 61000-4-3 Corr.I1

28 /8/ 2008

33.100.20

Interpretation sheet 1 - Electromagnetic compatibility (EMC) - Part 4-3: Testing and measurement techniques - Radiated, radio-frequency, electromagnetic field immunity test

通译活页规范1---电磁兼容性(EMC) ---4-3部分:试验和测量技术---辐射、无线电频率、电磁场抗干扰试验

3.0

 

 

IEC 60810-am1

28 /8/ 2008

29.140.99

Amendment 1 - Lamps for road vehicles - Performance requirements

修改1---公路交通车灯---性能要求

3.0

 

 

IEC 60700-1-am2

28 /8/ 2008

29.200. ; 31.080.20

Amendment 2 - Thyristor valves for high voltage direct current (HVDC) power transmission - Part 1: Electrical testing

修改2---高压直流(HVDC)功率发射半导体闸流管阀---1部分:电试验

1.0

 

 

IEC 60034-18-42

28 /8/ 2008

29.160.

Rotating electrical machines - Part 18-42: Qualification and acceptance tests for partial discharge resistant electrical insulation systems (Type II) used in rotating electrical machines fed from voltage converters

旋转电机---18-42部分:从电压转换器反馈的旋转电机中使用的抗部分放电绝缘系统(II型)的鉴定和验收试验

1.0

TC 2

 

IEC 60838-1

28 /8/ 2008

29.140.10

Miscellaneous lampholders - Part 1: General requirements and tests

多种灯座---1部分:总要求和试验

4.1

 

 

IEC 61258

28 /8/ 2008

11.040.

Guidelines for the development and use of medical electrical equipment educational materials

医用电子设备教材的开发和使用指南

2.0

SC 62A

 

IEC 60947-3

28 /8/ 2008

29.120.40 29.130.20

Low-voltage switchgear and controlgear - Part 3: Switches, disconnectors, switch-disconnectors and fuse-combination units

低压开关和控制器---3部分:开关、断开、开关转换和保险丝组合件

3.0

SC 17B

 

IEC 61400-SER

28 /8/ 2008

27.180.

Wind turbine generator systems - ALL PARTS

风轮发电机系统---所有部分

1.0

TC 88

 

ISO/IEC 24773

26 /8/ 2008

35.080.

Software engineering -- Certification of software engineering professionals -- Comparison framework

软件工程---软件工程专业合格证---比较框架

1.0

 

 

ISO/IEC 18014-1

26 /8/ 2008

35.040.

Information technology -- Security techniques -- Time-stamping services -- Part 1: Framework

信息技术---安全技术---计时打印服务---1部分:框架

2.0

 

 

IEC/TRF 60335-2-64

22 /8/ 2008

 

This Test Report Form applies to IEC 60335-2-64:2002 (3rd Edition) +A1:2007 in conjunction with IEC 60335-1:2001 (4th Edition) (incl. Corr.1:2002) +A1:2004 +A2:2006 (incl. Corr.1:2006)

该试验报告适用于IEC 60335-2-64: 2002 (3) +A1:2007 ,与 IEC 60335-1:2001 (4) (包括勘误表1:2002) +A1:2004 +A2:2006 (包括勘误表1:2006)

2.0

 

 

IEC 62317-14

21 /8/ 2008

29.100.10

Ferrite cores - Dimensions - Part 14: EFD-cores for use in power supply applications

铁氧体磁芯---尺寸---14部分:电力供应用EFD铁芯

1.0

TC 51

 

IEC 62047-4

21 /8/

2008

31.080.99

Semiconductor devices - Micro-electromechanical devices - Part 4: Generic specification for MEMS

半导体器件---微电机器件---4部分:MEMS总规范

1.0

SC 47F

 


·最新文章·
 
·热点文章·
·其他相关文章·
上一篇:欧盟08年8月中旬发布的电工标准目录
下一篇:没有了